For all TEN-TEC rigs that use the same interface method and
protocol as the Eagle Model 599, use the following file for
OmniRig.
TenTec Eagle.ini
Place it in the program files location for the ini files for
OmniRig.
e.g.
C:\Program Files\Afreet\OmniRig\Rigs
Run OmniRig and select the following:
	Rig type =		TenTec Eagle
	Port = the comm port for the Eagle
	Baud rate =		57600
	Data bits =		8
	Parity =		None
	Stop bits =		1
	RTS =			High
	DTR =			High
	Poll int. ms =	500 
	(do not poll more often than 250ms, 500 is recommended)
	Timeout, ms =	4000
Press OK


For programs using OmniRig, for the rig type, select "Omnirig".